Free 4×6 & 4×7 Sticker Sheet Maker
Fill a 4×6 or 4×7 in sheet with your own images, add a white border, download a 300 DPI transparent PNG.
Your images stay on this device. They are processed in your browser and never uploaded.
Photo to sticker: a small AI model finds the main subject and cuts it out on this device. The first time, it downloads about 19 MB from this site. Or tap ✂ on one photo.
8 stickers fit (2 × 4) at 1.5 in
Next: open your printing app
Upload guidanceDashed orange line = safety margin. It is shown in the preview only, not in the download.
The preview shows the printer’s printable area where the maker publishes one (Liene PixCut S1). Pre-cut alignment is handled in Design Space; this tool does not know the exact cut positions.
Safety margin: 0.15 in on all sides.
The printable area for Cricut StickerPix Print + Cut is not published. 0.15 in is our assumption — adjust if your prints clip.
Circle and rounded: each image is cropped to the shape and the white border follows the shape. Photos fill it; transparent images sit inside it on white. Circles need equal width and height.
How to use
- Add images. Choose or drop PNG, JPG or WebP files. Transparent PNGs work best because the white border follows the outline. For a photo, tap ✂ (or tick “Remove photo backgrounds”) to cut out the main subject on your device; ↺ undoes it.
- Pick the paper, size and shape. Choose your printer’s preset, a sticker size (or a custom width × height from 0.5 to 3.5 in) and a square, circle or rounded shape. The counter tells you how many stickers fit, and images too small to print sharp at that size are flagged.
- Adjust the border and spacing. Keep a gap between stickers so the white borders never touch.
- Download the PNG. You get a 300 DPI transparent PNG: 1200 × 1800 px for 4 × 6 in, or 1200 × 2100 px for 4 × 7 in.
Printing on your sticker printer
Cricut StickerPix Print + Cut
Upload the PNG in Cricut Design Space as an image, then confirm it is 4 in × 7 in on the canvas. Whether Design Space resizes a 1200 × 2100 px upload automatically is unknown, so check the size before printing.
Untested: whether Design Space cuts each sticker on a combined sheet separately, or only around the outer outline, is untested — we have not been able to test this on a StickerPix yet.
Liene PixCut S1
The Liene app accepts JPEG, PNG and HEIC files (Liene tech specs). Transparent PNGs help its automatic outline cutting — Liene’s own product FAQ says so (Liene product page). Choose the “Liene PixCut S1” preset above: Liene lists a printable size of 3.9 × 6.7 in on its 4 × 7 in sticker paper (Liene tech specs).
Canon SELPHY
SELPHY is a compact dye-sublimation photo printer line from Canon. Canon lists 4.0 × 6.0 in postcard, L, card and square label paper sizes for the SELPHY CP1500 (Canon spec sheet); choose 4×6 for a postcard photo layout. This does not establish compatibility with adhesive labels; use the correct Canon supplies and check cropping. See Liene PixCut S1 vs Canon SELPHY.
More detail: how to upload your own designs.
Why fill the whole sheet?
Each print uses a full ribbon panel regardless of how much of the sheet you cover (Kerri Crafts It). A sheet with one small sticker costs the same as a sheet packed edge to edge, so filling every slot gets you the most stickers per sheet. See cost per sheet and per sticker for the numbers and a small calculator.
Starting from a photo? Photo to sticker shows how to cut out the background and which photos work best. No artwork yet? Try the free Halloween 4×7 sticker sheets. Each template has an “Open in sheet maker” link that loads its stickers here, so you can resize them, change the shape or mix them with your own images.
Quick answers
Are my images uploaded anywhere?
No. The sheet is built in your browser on your own device. Nothing is sent to a server.
Can it remove the background from a photo?
Yes, on your device: a small AI model (U²-Netp) downloads from this site the first time (about 19 MB) and cuts out the main subject, then the white border follows its outline. It works best with one clear subject on a contrasting background; check the edges before printing. See photo to sticker for tips and limits.
Can I make rectangular stickers?
Yes. Choose “Custom size or rectangle” and set the width and height (0.5 to 3.5 in). Square or rounded shapes work at any size; a circle needs equal sides.
What size is the downloaded file?
1200 × 1800 pixels for 4 × 6 in, or 1200 × 2100 pixels for 4 × 7 in, at 300 DPI (1 in = 300 px).
Can I use Liene paper in a Cricut StickerPix?
Not according to either brand: Cricut says its Print + Cut refills are for the Print + Cut only (Cricut shop), and Liene says the PixCut S1 works exclusively with official Liene paper (Liene materials guide). See the compatibility FAQ.
Is this an official Cricut or Liene tool?
No. Sticker Printer Hub is an independent site and is not affiliated with Cricut, Liene or Canon.
Sources
All 6 sources, each with its access date
- Liene tech specs, “Technical Specifications for PixCut S1”
- Liene product page, “PixCut S1 Photo Sticker Printer and Cutter (product page)”
- Canon spec sheet, “SELPHY CP1500 Spec Sheet (PDF)”
- Kerri Crafts It, “Cricut StickerPix Review: Print + Cut vs Print”
- Cricut shop, “StickerPix Print + Cut Sticker Sheets & Ink Cartridge Set (72 Prints)”
- Liene materials guide, “How to Pick the Right PixCut S1 Material for Your Project”